New standards to become mandatory in six months

By James Limbach of ConsumerAffairs

Following recalls of millions of cribs due to entrapment deaths and injuries, the Consumer Product Safety Commission (CPSC) has adopted new rules designed to insure that new cribs have been tested for safety to rigorous standards.

The Consumer Product Safety Improvement Act (CPSIA), signed into law in August of 2008, requires the agency to issue mandatory standards for infant durable products. This provision of the CPSIA was named in honor and in memory of Danny Keysar, who was 16 months old when he died in his Chicago childcare home because a portable crib collapsed around his neck.

The CPSIA requires mandatory standards and testing for durable infant and toddler products, product registration cards and a ban on the sale or lease of unsafe cribs. Cribs are among the first products for which mandatory standards have been promulgated under this provision.

"This new mandatory standard, the strongest in the world, will ensure that new cribs coming onto the market will provide safe haven for babies and their families," said Nancy Cowles, Executive Director of Kids In Danger. "We applaud CPSC for their hard work and tenacity in developing and adopting this landmark rule."

Requirements

The new rule puts many new tests and requirements in place:

• Cribs with full side drop-sides will not be allowed -- the bottom 20 inches of the crib rail must be fixed to eliminate the entrapment hazards seen when the hardware fails.
• All cribs must undergo rigorous testing for slat strength, durability and mattress support strength. The series of testing is conducted on one crib to simulate a lifetime use of a crib. This is the key to the new standard. Most of the 10 million cribs recalled since 2007 were able to meet the weak industry standards that were in place.
• Warnings and labeling have been improved, both to make parents more aware of when a crib is mis-assembled and to alert them to developmental signs to stop using a crib (when the child attempts to climb out). While most attention has been rightly focused on entrapment deaths in cribs, most injuries are as a result of children falling out of cribs

Higher standards

The new requirements are mostly part of the ASTM International voluntary standard that has been adapted to serve as the CPSC mandatory rule. Over the past two years industry, consumer advocates and safety experts have worked to update the voluntary standard to provide real assurances of a safe product. Prior to the recent rewrite, the most recent significant changes to the voluntary standard were made in 1999.

The CPSC mandatory standard was last changed in 1982. The new standards include two sets of similar rules: one for full-size cribs and one for non-full-size cribs. Non-full-size cribs can be smaller, larger or a different shape than a full-size crib, which is a standardized shape and size.

"The lack of durability of recently produced cribs is appalling and has put many babies at risk," said Don Mays, senior director of product safety and technical policy for Consumers Union/Consumer Reports. "These new regulations will ensure safe sleep environments by raising the bar for the safety and quality of cribs."

New and used covered

For the first time, this mandatory rule promulgated by CPSC applies to products already in use by some entities as well as to new products. Efforts will begin immediately to remove older unsafe products off store shelves, out of childcare homes, and out of hotels.

The CPSIA includes a section requiring that cribs that don't meet the new standard can't be sold -- new or used, used in child care, used by hotel guests, or used in other public accommodations. This measure alone will go far in removing unsafe cribs from use. This does not apply to already purchased cribs being used in private homes, except for barring their resale.

Six months after the publication of the standard, all cribs on the market must be in compliance. The Commission voted to give childcare facilities and hotels an additional 18 months after that date to replace any non-compliant cribs. CPSC has indicated that cribs currently being manufactured and tested that meet the new standard can continue to be used, even though their sale took place prior to the new rule being official.

"After years of foot dragging by the industry," said Elizabeth Hitchcock of US Public Interest Research Group. "CPSC has now approved a standard and testing regimen that will keep children safe -- avoiding the crib recalls, entrapment deaths and injuries that have plagued the industry."

Illinois Attorney General says products are dangerous to infants

By Mark Huffman of ConsumerAffairs

Illinois Attorney General Lisa Madigan, who last week praised a new federal ban on drop side cribs, is now warning parents and caregivers about bumper pads -- the soft pillow-like objects used along side of cribs.

Madigan said immediate action is necessary in light of the number of infant deaths and injuries attributed to the pads.

The attorney general said she issued the warning to alert caregivers of this danger to prevent infant deaths. Babies might suffocate or be strangled if they roll against a crib bumper, press their faces against the bumper, wedge their heads between the pad and the mattress or crib side, or if their necks get wrapped by the tie that secures the bumper to the crib.

Known problem

Her warning follows an investigative report published in the Chicago Tribune that found federal regulators have known for years that bumper pads pose a suffocation hazard for babies but failed to warn parents. Bedding manufacturers and their trade group have been alerted to the issue but have yet to take action, the Tribune reported.

"We know that children have tragically died in their cribs because of these bumper pads," Madigan said. "Parents and caregivers should remove these bumpers to prevent tragedy."

Since 2008, the National Center for Child Death Review has received reports of 14 infants who have died from suffocation caused by crib bumpers. The American Academy of Pediatrics, the American SIDS Institute and the Canadian Health Department have all urged parents not to use crib bumpers.

Call for action

Attorney General Madigan said she has partnered with the American Academy of Pediatrics,Kids in Danger, the American SIDS Institute, SIDS of Illinois and the Canadian Health Department to alert caregivers of the danger crib bumpers pose.

She also sent a letter to the Juvenile Products Manufacturers Association (JPMA) demanding the group release results from its study into the dangers of crib bumper pads. A study commissioned by JPMA to investigate these dangers has yet to be published while the group internally reviews the report. Madigan urged the association to release the study immediately, so the proper authorities can take any necessary steps to prevent further harm.

"The JPMA needs to release results of its study and implement effective measures to remove these bumpers from the marketplace," Madigan said. "Manufacturers and distributors of these pads must take responsibility for the dangers posed by these products. We must work together to educate parents and caregivers and ensure cribs across Illinois and nationwide are safe for babies."

The Juvenile Products Manufacturers Association is a national trade organization that represents companies across the country that manufacture, import and distribute infant products like cribs, car seats and strollers.

Missing Safety Pegs Create Risk of Entrapment and Suffocation

By Truman Lewis of ConsumerAffairs

The U.S. Consumer Product Safety Commission (CPSC) is repeating the 2008 recall of more than 985,000 drop-side cribs with "Crib Trigger Lock and Safety Peg" hardware.

In January 2011, CPSC and Delta Enterprise Corp., the crib's manufacturer, learned of a 2009 death in which a 7-month-old girl from Colorado Springs, Colo., became entrapped and suffocated between the detached drop-side and mattress of her recalled crib. The crib was purchased secondhand and re-assembled without safety pegs in the bottom tracks.

Missing safety pegs can create a situation where the crib's drop-side rail disengages from the track. This can create a hazardous space in which an infant can become entrapped and suffocate.

At the time of the October 2008 recall, CPSC notified consumers about the death of an 8-month-old girl who became entrapped and suffocated when the drop side of the crib detached. The crib involved in this incident also was re-assembled without safety pegs. At the time of the October 2008 recall announcement, there were reports of two entrapments and nine detachments in cribs without safety pegs.

"Buying or accepting cribs second hand can be risky," said CPSC Chairman Inez Tenenbaum. "Second hand cribs may not come with all of the necessary parts that are needed to make sure your baby is safe. We urge parents and caregivers to use caution and to be aware that new rules established by CPSC will bring safer cribs to the market this summer."

The repeated recall involves cribs that were made in Taiwan and Indonesia. The cribs were sold at major retail stores including Kmart, Target and Walmart between January 1995 and December 2005 (through September 2007 for model 4624) for about $100.

Delta's name and address is printed on the mattress support boards and the Delta logo is on the crib's top teether rail. Model numbers are located on the top of the mattress support board. This announcement includes the following 49 crib models with "Crib Trigger Lock with Safety Peg" drop-side hardware:

• 4320, 4340;
• 4500, 4520, 4530, 4532, 4540, 4542, 4550, 4551, 4580;
• 4600, 4620, 4624 - production dates 01/06 thru 11/07, 4640, 4660, 4720, 4735, 4742, 4750 - production dates 01/95 thru 12/00;
• 4760, 4770, 4780, 4790;
• 4820, 4840, 4850, 4860, 4880, 4890, 4892; and
• 4900, 4910, 4920, 4925-2, 4925-6, 4930, 4940, 4943, 4944, 4947, 4948, 4949, 4950, 4958, 4963, 4968, 4969, 4980.

CPSC urges parents and caregivers to immediately stop using cribs that are missing a safety peg on either leg of the drop side and contact Delta to receive a free, easy-to-install repair kit. Call Delta toll-free at (800) 816-5304 anytime or visit the firm's website at www.cribrecallcenter.com to order the free repair kit.

Parents and caregivers are encouraged to find a safe, alternative sleep environment for their child until the repair kit, with new safety pegs, is safely installed on the recalled cribs.

CPSC reminds parents not to use any crib with missing, broken or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop-side crib, parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for parts separating that can create a gap and entrap a child.

In addition, do not try to repair any side of the crib. Babies have died in cribs where repairs were attempted by caregivers. Crib age is a factor in safety. At a minimum, CPSC staff recommends that you do not use a crib that is older than 10 years old. New, mandatory federal crib rules take effect on June 28, 2011. All cribs manufactured and sold after that date must meet new and improved safety requirements. Older cribs do not meet the new standard and can have a variety of safety problems.

U.S. hadn't updated crib safety standards for 30 years

By James R. Hood of ConsumerAffairs

Setting aside objections from retailers and manufacturers, the U.S. Consumer Product Safety Commission is implementing new safety standards for baby cribs later this month.

Effective June 28, anyone who manufactures or sells cribs will be required to meet the new standards, although day care centers, crib rental companies and hotels will have until December 28, 2012 to update their cribs.

“I am very pleased that the new mandatory crib standards will stop the manufacture and sale of dangerous traditional drop-side cribs and will vastly improve the structural integrity of cribs,” said CPSC chair Inez M. Tenenbaum, noting that crib safety standards have not been updated in nearly 30 years.

Detaching drop-side rails were associated with at least 32 infant suffocation and strangulation deaths since 2000, according to the CPSC. Additional deaths have occurred due to faulty or defective hardware.

Manufacturers and retailers had objected that the new rules would cause an economic hardship, particularly on smaller stores but the commission voted 3-2 to impose the new standards on schedule.

The new standards will:

1. stop the manufacture and sale of dangerous, traditional drop-side cribs;

2. make mattress supports stronger;

3. improve slat strength,

4. make crib hardware more durable; and

5. make safety testing more rigorous.

The standards aim to keep children safer in their cribs and prevent deaths resulting from detaching crib drop-sides and faulty or defective hardware. The tougher standards were mandated by the Consumer Product Safety Improvement Act of 2008.

Tenenbaum said the commission granted the delays to child care centers, crib rental stores and hotels and motels were necessary not only to minimize the economic impact but also to prevent shortages of new cribs. She estimated that replacing all of the cribs already in use at such locations would create a demand of approximately 935,000 cribs, which would amount to nearly $467 million in replacement costs.

“In order to ensure sufficient availability of compliant cribs and ensure an orderly and successful transition to the use of complaint cribs by child care providers and places of public accommodation, the Commission adopted a two-step phase in of the rule,” Tenenbaum said.

Retailers unhappy

Any cribs not meeting the current standard must be destroyed if they’re not sold by June 28. Industry estimates put the number of unsold cribs between 10,000 and 20,000. Some retailers, hoping to clear out their stock, have offered steep discounts to consumers.

“Overregulation is going to lead to the destroying of thousands of cribs that are perfectly good — many that are better than what will come out after the new regulations,” Gene Francis, a South Dakota-based retailer and member of the National Independent Nursery Furniture Retailers Association, told Kids Today.

But Commissioner Thomas Moore showed little sympathy for that argument.

"We expect companies to comply with the Commission’s rules," he said. "It appears that the vast majority of retailers did plan and are ready to comply by the June 28th date.  In a rule of this magnitude, it is expected that there will be 
some market disruption and that some companies will experience economic loss."

Moore said it was impractical to ask the CPSC to allow retailers to continue selling cribs that do not meet the new standard.

"There is little that we know about the noncomplying cribs these retailers want to sell or about the reasons the retailers find themselves with noncompliant inventory.  However, there is much that we don’t know.  When were these cribs made?  Who made them and where?  Who tested them and when?  What standard were they tested to?  When were they ordered?  Did the quantity ordered take into account the looming effective date of the new crib standards?"

"Were retailers buying imported noncomplying cribs at fire sale prices to try to make a profit before they had to start buying more expensive cribs that met the new standards?" Moore asked.  "Will retrofit kits be available to bring the cribs into compliance?  We simply do not know."

The crib's tubular metal mattress-support frame can bend or detach and cause part of the mattress to collapse, creating a space into which an infant or toddler can roll and become wedged, entrapped or fall out of the crib.

          









      

CPSC has received a report of a one-year-old child from North Attleboro, Mass. who suffocated when he became entrapped between the crib mattress and the crib frame in April 2008. CPSC is aware of 13 additional incidents involving the recalled cribs collapsing due to the metal mattress-support frame bending or detaching, including one child entrapment that did not result in injury, and one child who suffered minor cuts to his head when his mattress collapsed and he fell out of the crib.

CPSC staff urges parents and caregivers to stop using these cribs immediately and find an alternative, safe sleeping environment for their baby. Do not attempt to fix these cribs.

Due to the fact that Simplicity and its successor, SFCA Inc., are no longer in business, CPSC has limited information about the number of cribs sold.

All Simplicity drop-side cribs have previously been recalled for a hazard involving the drop side. Simplicity drop-side cribs could still be in use by parents or caregivers who are unaware of the recalls or by those who received a repair kit to immobilize the drop side from Simplicity when the firm was still in business. This recall involves all Simplicity cribs with tubular metal mattress-support frames, which include but are not limited to the following models:

Some model numbers are followed by letters, indicating the color or finish of the crib. The name "Simplicity Inc." or "Simplicity for Children" appears on a label on the crib's mattress-support frame and/or the crib's end panels. The cribs were manufactured in China.

The recalled cribs were sold at Walmart, Target, Babies R Us and other stores nationwide for between $150 and $300. Consumers should contact the store where the crib was purchased to receive a refund, replacement crib or store credit.

Warning

CPSC would like to remind parents not to use any crib with missing, broken or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop-side crib, parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for disengagement. Any disengagement can create a gap, which could fatally entrap a child. In addition, do not try to repair any side of the crib with tape, wire, rope or by other means. Infants and toddlers have died in cribs with makeshift repairs.

For more information on Crib Safety, visit CPSC's Crib Information Center.

The recall is being conducted in cooperation with the U.S. Consumer Product Safety Commission (CPSC).

More than 9 million dangerous cribs recalled since 2005

By Mark Huffman of ConsumerAffairs

After high-profile recalls of drop-side cribs that can suffocate infants, the Consumer Product Safety Commission has expanded its recall to include two million cribs made by seven companies.

The beds included in the recall were made by Child Craft, Delta Enterprises Corp., Evenflo, Jardine Enterprises, LaJobi, More on this recall and Simmons Juvenile Products Inc.

Some, but not all, are the drop-side cribs, which pose a danger to infants who become trapped in the gap between the mattress and the side of the crib. Included in this latest recall is the Child Craft brand "Crib 'N' Double Bed" full size stationary-side crib with dowel.

The crib's stationary side can be assembled upside-down but still appears to be assembled correctly. If assembled upside-down, the crib side contains a hazardous five-inch gap at the top of the crib. Infants or toddlers can become entrapped in this gap, which can lead to entrapment, strangulation or other injuries.

CPSC has received four reports of children becoming entrapped between the dowel and the crib's stationary front side. In two of those reports, the child was trapped by his/her head and was in danger of being strangled. In the other two reports, the child was trapped by his/her arm. This hazard can occur on both the front and back sides of the crib, the agency said.

Listed below are cribs included in the latest recall.

747,000 Delta drop-side cribs

Improper installation can cause the mattress platform to collapse.

This recall involves Delta drop-side cribs with three different types of drop-side hardware and Delta cribs with wooden stabilizer bars that support the mattress platform.

• Delta Enterprises Corp.

750,000 Jenny Lind drop-side cribs distributed by Evenflo

CPSC and Evenflo have received 31 reports of drop sides that malfunctioned or detached. One involved the entrapment of a seven-month-old boy between the drop side and the crib mattress. He sustained bumps and bruises to his head. Nine children fell out of the crib when the drop side detached, unlocked or fell off. Seven of those children sustained minor injuries, including bumps, bruises and cuts. Fourteen other incidents involved no injuries. In addition, CPSC has received two reports of children who became entrapped when the mattress support detached in one corner of cribs manufactured between 2000 and 2004.

• More on this recall

306,000 Bonavita, Babi Italia and ISSI drop-side cribs manufactured by LaJobi

This recall involves all models of Bonavita, Babi Italia and ISSI drop-side cribs manufactured by LaJobi. The cribs have drop-side hardware that contains metal or plastic pegs that are recessed into either the drop side or the headboard and footboard of the crib. A label on the headboard of the crib identifies the manufacturer as LaJobi.

• LaJobi

130,000 Jardine drop-side cribs imported by Toys R Us

The cribs' drop sides can malfunction, detach or otherwise fail, causing part of the drop side to fall out of position, creating a space into which an infant or toddler can roll and become wedged or entrapped, which can lead to strangulation or suffocation.

• Jardine Enterprises

156,000 Million Dollar Baby drop-side cribs

CPSC and Million Dollar Baby have received 43 reports of drop side failures. There were eight reports of children being entrapped between the mattress and drop side resulting in three reports of bruises to the head or upper body. Additionally, three children fell out of the crib when the drop side failed but they were not injured.

• More on this recall

50,000 Simmons drop-side cribs

The cribs' drop sides can malfunction, detach or otherwise fail, causing part of the drop side to fall out of position, creating a space into which an infant or toddler can roll and become wedged or entrapped, which can lead to strangulation or suffocation. A child can also fall out of the crib. Drop-side incidents can also occur due to incorrect assembly and with age-related wear and tear. Style numbers are printed on a permanent label on the headboard.

• Simmons Juvenile Products Inc.

In the last five years more than nine million cribs have been recalled because of a potential hazard to children. Drop-side cribs are blamed for the deaths of 32 children since 2000, CPSC said.

The cribs drop sides can malfunction, detach or otherwise fail, causing part of the drop side to fall out of position, creating a space into which an infant or toddler can roll and become wedged or entrapped, which can lead to strangulation or suffocation. A child can also fall out of the crib. Drop-side incidents can also occur due to incorrect assembly and with age-related wear and tear.

Incidents/Injuries: CPSC and Evenflo have received 31 reports of drop sides that malfunctioned or detached. One involved the entrapment of a seven month old boy between the drop side and the crib mattress. He sustained bumps and bruises to his head. Nine children fell out of the crib when the drop side detached, unlocked or fell off. Seven of those children sustained minor injuries, including bumps, bruises and cuts. Fourteen other incidents involved no injuries.

In addition, CPSC has received two reports of children who became entrapped when the mattress support detached in one corner of cribs manufactured between 2000 and 2004.

The following Evenflo crib models are included in this recall. The model number is located on a label on the bottom beam of the headboard.

The cribs, made in Mexico and China, were sold at childrens product stores and various other retailers nationwide from January 2000 through November 2007 for about $200.

Consumers should immediately stop using the recalled drop-side cribs and contact Evenflo to receive a free repair kit that will immobilize the drop side. A repair kit for the mattress support system is also available for cribs with model numbers starting with 012 and 014 that were manufactured between 2000 and 2004. In the meantime, find an alternate, safe sleep environment for the child, such as a bassinet, play yard or toddler bed depending on the childs age. The repair kits will be provided to consumers within the next several weeks.

For additional information, contact Evenflo at (800) 356-2229 between 8 a.m. and 5 p.m. ET Monday through Friday or visit the firms web site at http://safety.evenflo.com

Cautionary note

Federal safety regulators remind parents not to use any crib with missing, broken, or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop-side crib, parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for disengagement. Disengagements can create a gap and entrap a child.

In addition, parents should not try to repair any side of the crib. Babies have died in cribs where repairs were attempted by caregivers. Age is a factor in the safety of any crib. At a minimum, CPSC staff recommends that you not use a crib that is older than 10 years. Many older cribs may not meet current voluntary standards and can have numerous safety problems.

The recall is being conducted in cooperation with the U.S. Consumer Product Safety Commission (CPSC).

Missing Safety Pegs Create Risk of Entrapment and Suffocation

By Truman Lewis of ConsumerAffairs

The U.S. Consumer Product Safety Commission (CPSC) is repeating the 2008 recall of more than 985,000 drop-side cribs with "Crib Trigger Lock and Safety Peg" hardware.

In January 2011, CPSC and Delta Enterprise Corp., the crib's manufacturer, learned of a 2009 death in which a 7-month-old girl from Colorado Springs, Colo., became entrapped and suffocated between the detached drop-side and mattress of her recalled crib. The crib was purchased secondhand and re-assembled without safety pegs in the bottom tracks.

Missing safety pegs can create a situation where the crib's drop-side rail disengages from the track. This can create a hazardous space in which an infant can become entrapped and suffocate.

At the time of the October 2008 recall, CPSC notified consumers about the death of an 8-month-old girl who became entrapped and suffocated when the drop side of the crib detached. The crib involved in this incident also was re-assembled without safety pegs. At the time of the October 2008 recall announcement, there were reports of two entrapments and nine detachments in cribs without safety pegs.

"Buying or accepting cribs second hand can be risky," said CPSC Chairman Inez Tenenbaum. "Second hand cribs may not come with all of the necessary parts that are needed to make sure your baby is safe. We urge parents and caregivers to use caution and to be aware that new rules established by CPSC will bring safer cribs to the market this summer."

The repeated recall involves cribs that were made in Taiwan and Indonesia. The cribs were sold at major retail stores including Kmart, Target and Walmart between January 1995 and December 2005 (through September 2007 for model 4624) for about $100.

Delta's name and address is printed on the mattress support boards and the Delta logo is on the crib's top teether rail. Model numbers are located on the top of the mattress support board. This announcement includes the following 49 crib models with "Crib Trigger Lock with Safety Peg" drop-side hardware:

• 4320, 4340;
• 4500, 4520, 4530, 4532, 4540, 4542, 4550, 4551, 4580;
• 4600, 4620, 4624 - production dates 01/06 thru 11/07, 4640, 4660, 4720, 4735, 4742, 4750 - production dates 01/95 thru 12/00;
• 4760, 4770, 4780, 4790;
• 4820, 4840, 4850, 4860, 4880, 4890, 4892; and
• 4900, 4910, 4920, 4925-2, 4925-6, 4930, 4940, 4943, 4944, 4947, 4948, 4949, 4950, 4958, 4963, 4968, 4969, 4980.

CPSC urges parents and caregivers to immediately stop using cribs that are missing a safety peg on either leg of the drop side and contact Delta to receive a free, easy-to-install repair kit. Call Delta toll-free at (800) 816-5304 anytime or visit the firm's website at www.cribrecallcenter.com to order the free repair kit.

Parents and caregivers are encouraged to find a safe, alternative sleep environment for their child until the repair kit, with new safety pegs, is safely installed on the recalled cribs.

CPSC reminds parents not to use any crib with missing, broken or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop-side crib, parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for parts separating that can create a gap and entrap a child.

In addition, do not try to repair any side of the crib. Babies have died in cribs where repairs were attempted by caregivers. Crib age is a factor in safety. At a minimum, CPSC staff recommends that you do not use a crib that is older than 10 years old. New, mandatory federal crib rules take effect on June 28, 2011. All cribs manufactured and sold after that date must meet new and improved safety requirements. Older cribs do not meet the new standard and can have a variety of safety problems.

U.S. hadn't updated crib safety standards for 30 years

By James R. Hood of ConsumerAffairs

Setting aside objections from retailers and manufacturers, the U.S. Consumer Product Safety Commission is implementing new safety standards for baby cribs later this month.

Effective June 28, anyone who manufactures or sells cribs will be required to meet the new standards, although day care centers, crib rental companies and hotels will have until December 28, 2012 to update their cribs.

“I am very pleased that the new mandatory crib standards will stop the manufacture and sale of dangerous traditional drop-side cribs and will vastly improve the structural integrity of cribs,” said CPSC chair Inez M. Tenenbaum, noting that crib safety standards have not been updated in nearly 30 years.

Detaching drop-side rails were associated with at least 32 infant suffocation and strangulation deaths since 2000, according to the CPSC. Additional deaths have occurred due to faulty or defective hardware.

Manufacturers and retailers had objected that the new rules would cause an economic hardship, particularly on smaller stores but the commission voted 3-2 to impose the new standards on schedule.

The new standards will:

1. stop the manufacture and sale of dangerous, traditional drop-side cribs;

2. make mattress supports stronger;

3. improve slat strength,

4. make crib hardware more durable; and

5. make safety testing more rigorous.

The standards aim to keep children safer in their cribs and prevent deaths resulting from detaching crib drop-sides and faulty or defective hardware. The tougher standards were mandated by the Consumer Product Safety Improvement Act of 2008.

Tenenbaum said the commission granted the delays to child care centers, crib rental stores and hotels and motels were necessary not only to minimize the economic impact but also to prevent shortages of new cribs. She estimated that replacing all of the cribs already in use at such locations would create a demand of approximately 935,000 cribs, which would amount to nearly $467 million in replacement costs.

“In order to ensure sufficient availability of compliant cribs and ensure an orderly and successful transition to the use of complaint cribs by child care providers and places of public accommodation, the Commission adopted a two-step phase in of the rule,” Tenenbaum said.

Retailers unhappy

Any cribs not meeting the current standard must be destroyed if they’re not sold by June 28. Industry estimates put the number of unsold cribs between 10,000 and 20,000. Some retailers, hoping to clear out their stock, have offered steep discounts to consumers.

“Overregulation is going to lead to the destroying of thousands of cribs that are perfectly good — many that are better than what will come out after the new regulations,” Gene Francis, a South Dakota-based retailer and member of the National Independent Nursery Furniture Retailers Association, told Kids Today.

But Commissioner Thomas Moore showed little sympathy for that argument.

"We expect companies to comply with the Commission’s rules," he said. "It appears that the vast majority of retailers did plan and are ready to comply by the June 28th date.  In a rule of this magnitude, it is expected that there will be 
some market disruption and that some companies will experience economic loss."

Moore said it was impractical to ask the CPSC to allow retailers to continue selling cribs that do not meet the new standard.

"There is little that we know about the noncomplying cribs these retailers want to sell or about the reasons the retailers find themselves with noncompliant inventory.  However, there is much that we don’t know.  When were these cribs made?  Who made them and where?  Who tested them and when?  What standard were they tested to?  When were they ordered?  Did the quantity ordered take into account the looming effective date of the new crib standards?"

"Were retailers buying imported noncomplying cribs at fire sale prices to try to make a profit before they had to start buying more expensive cribs that met the new standards?" Moore asked.  "Will retrofit kits be available to bring the cribs into compliance?  We simply do not know."

The crib’s drop-side rails can malfunction, detach or otherwise fail

By James Limbach of ConsumerAffairs

Nan Far Woodworking is recalling about 3,900 Rockland Furniture round cribs.

The crib’s drop-side rails can malfunction, detach or otherwise fail. When this happens, the drop-side rail can fall out of position and create a space where an infant or toddler can become wedged or entrapped, posing a risk of strangulation or suffocation. A child can also fall out of the crib. In addition, drop-side related incidents can also occur due to incorrect assembly and with age-related wear and tear.

No incidents or injuries have been reported.

This recall involves Rockland Furniture round cribs with model number 343-8314. The model number is printed on a label located on the inner-lower portion of the crib rail. The cribs are 44 ½ inches in diameter and were sold in white, ebony and cherry finishes.

The cribs, manufactured in Taiwan, were sold exclusively at J.C. Penney stores and online at jcpenney.com from January 2005, to December 2008, for about $400.

Consumers should immediately stop using the recalled cribs and contact Rockland Furniture for a free repair kit that will immobilize the drop-side rail. Until the crib is repaired, consumers should find an alternate, safe sleep environment for the child such as a bassinet, play yard or toddler bed, depending on the child’s age.

Consumers may contact Rockland Furniture toll-free at (877) 967-5770 anytime.

The crib's tubular metal mattress-support frame can bend or detach and cause part of the mattress to collapse, creating a space into which an infant or toddler can roll and become wedged, entrapped or fall out of the crib.

          









      

CPSC has received a report of a one-year-old child from North Attleboro, Mass. who suffocated when he became entrapped between the crib mattress and the crib frame in April 2008. CPSC is aware of 13 additional incidents involving the recalled cribs collapsing due to the metal mattress-support frame bending or detaching, including one child entrapment that did not result in injury, and one child who suffered minor cuts to his head when his mattress collapsed and he fell out of the crib.

CPSC staff urges parents and caregivers to stop using these cribs immediately and find an alternative, safe sleeping environment for their baby. Do not attempt to fix these cribs.

Due to the fact that Simplicity and its successor, SFCA Inc., are no longer in business, CPSC has limited information about the number of cribs sold.

All Simplicity drop-side cribs have previously been recalled for a hazard involving the drop side. Simplicity drop-side cribs could still be in use by parents or caregivers who are unaware of the recalls or by those who received a repair kit to immobilize the drop side from Simplicity when the firm was still in business. This recall involves all Simplicity cribs with tubular metal mattress-support frames, which include but are not limited to the following models:

Some model numbers are followed by letters, indicating the color or finish of the crib. The name "Simplicity Inc." or "Simplicity for Children" appears on a label on the crib's mattress-support frame and/or the crib's end panels. The cribs were manufactured in China.

The recalled cribs were sold at Walmart, Target, Babies R Us and other stores nationwide for between $150 and $300. Consumers should contact the store where the crib was purchased to receive a refund, replacement crib or store credit.

Warning

CPSC would like to remind parents not to use any crib with missing, broken or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop-side crib, parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for disengagement. Any disengagement can create a gap, which could fatally entrap a child. In addition, do not try to repair any side of the crib with tape, wire, rope or by other means. Infants and toddlers have died in cribs with makeshift repairs.

For more information on Crib Safety, visit CPSC's Crib Information Center.

The recall is being conducted in cooperation with the U.S. Consumer Product Safety Commission (CPSC).

More than 9 million dangerous cribs recalled since 2005

By Mark Huffman of ConsumerAffairs

After high-profile recalls of drop-side cribs that can suffocate infants, the Consumer Product Safety Commission has expanded its recall to include two million cribs made by seven companies.

The beds included in the recall were made by Child Craft, Delta Enterprises Corp., Evenflo, Jardine Enterprises, LaJobi, More on this recall and Simmons Juvenile Products Inc.

Some, but not all, are the drop-side cribs, which pose a danger to infants who become trapped in the gap between the mattress and the side of the crib. Included in this latest recall is the Child Craft brand "Crib 'N' Double Bed" full size stationary-side crib with dowel.

The crib's stationary side can be assembled upside-down but still appears to be assembled correctly. If assembled upside-down, the crib side contains a hazardous five-inch gap at the top of the crib. Infants or toddlers can become entrapped in this gap, which can lead to entrapment, strangulation or other injuries.

CPSC has received four reports of children becoming entrapped between the dowel and the crib's stationary front side. In two of those reports, the child was trapped by his/her head and was in danger of being strangled. In the other two reports, the child was trapped by his/her arm. This hazard can occur on both the front and back sides of the crib, the agency said.

Listed below are cribs included in the latest recall.

747,000 Delta drop-side cribs

Improper installation can cause the mattress platform to collapse.

This recall involves Delta drop-side cribs with three different types of drop-side hardware and Delta cribs with wooden stabilizer bars that support the mattress platform.

• Delta Enterprises Corp.

750,000 Jenny Lind drop-side cribs distributed by Evenflo

CPSC and Evenflo have received 31 reports of drop sides that malfunctioned or detached. One involved the entrapment of a seven-month-old boy between the drop side and the crib mattress. He sustained bumps and bruises to his head. Nine children fell out of the crib when the drop side detached, unlocked or fell off. Seven of those children sustained minor injuries, including bumps, bruises and cuts. Fourteen other incidents involved no injuries. In addition, CPSC has received two reports of children who became entrapped when the mattress support detached in one corner of cribs manufactured between 2000 and 2004.

• More on this recall

306,000 Bonavita, Babi Italia and ISSI drop-side cribs manufactured by LaJobi

This recall involves all models of Bonavita, Babi Italia and ISSI drop-side cribs manufactured by LaJobi. The cribs have drop-side hardware that contains metal or plastic pegs that are recessed into either the drop side or the headboard and footboard of the crib. A label on the headboard of the crib identifies the manufacturer as LaJobi.

• LaJobi

130,000 Jardine drop-side cribs imported by Toys R Us

The cribs' drop sides can malfunction, detach or otherwise fail, causing part of the drop side to fall out of position, creating a space into which an infant or toddler can roll and become wedged or entrapped, which can lead to strangulation or suffocation.

• Jardine Enterprises

156,000 Million Dollar Baby drop-side cribs

CPSC and Million Dollar Baby have received 43 reports of drop side failures. There were eight reports of children being entrapped between the mattress and drop side resulting in three reports of bruises to the head or upper body. Additionally, three children fell out of the crib when the drop side failed but they were not injured.

• More on this recall

50,000 Simmons drop-side cribs

The cribs' drop sides can malfunction, detach or otherwise fail, causing part of the drop side to fall out of position, creating a space into which an infant or toddler can roll and become wedged or entrapped, which can lead to strangulation or suffocation. A child can also fall out of the crib. Drop-side incidents can also occur due to incorrect assembly and with age-related wear and tear. Style numbers are printed on a permanent label on the headboard.

• Simmons Juvenile Products Inc.

In the last five years more than nine million cribs have been recalled because of a potential hazard to children. Drop-side cribs are blamed for the deaths of 32 children since 2000, CPSC said.

The cribs drop sides can malfunction, detach or otherwise fail, causing part of the drop side to fall out of position, creating a space into which an infant or toddler can roll and become wedged or entrapped, which can lead to strangulation or suffocation. A child can also fall out of the crib. Drop-side incidents can also occur due to incorrect assembly and with age-related wear and tear.

Incidents/Injuries: CPSC and Evenflo have received 31 reports of drop sides that malfunctioned or detached. One involved the entrapment of a seven month old boy between the drop side and the crib mattress. He sustained bumps and bruises to his head. Nine children fell out of the crib when the drop side detached, unlocked or fell off. Seven of those children sustained minor injuries, including bumps, bruises and cuts. Fourteen other incidents involved no injuries.

In addition, CPSC has received two reports of children who became entrapped when the mattress support detached in one corner of cribs manufactured between 2000 and 2004.

The following Evenflo crib models are included in this recall. The model number is located on a label on the bottom beam of the headboard.

The cribs, made in Mexico and China, were sold at childrens product stores and various other retailers nationwide from January 2000 through November 2007 for about $200.

Consumers should immediately stop using the recalled drop-side cribs and contact Evenflo to receive a free repair kit that will immobilize the drop side. A repair kit for the mattress support system is also available for cribs with model numbers starting with 012 and 014 that were manufactured between 2000 and 2004. In the meantime, find an alternate, safe sleep environment for the child, such as a bassinet, play yard or toddler bed depending on the childs age. The repair kits will be provided to consumers within the next several weeks.

For additional information, contact Evenflo at (800) 356-2229 between 8 a.m. and 5 p.m. ET Monday through Friday or visit the firms web site at http://safety.evenflo.com

Cautionary note

Federal safety regulators remind parents not to use any crib with missing, broken, or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop-side crib, parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for disengagement. Disengagements can create a gap and entrap a child.

In addition, parents should not try to repair any side of the crib. Babies have died in cribs where repairs were attempted by caregivers. Age is a factor in the safety of any crib. At a minimum, CPSC staff recommends that you not use a crib that is older than 10 years. Many older cribs may not meet current voluntary standards and can have numerous safety problems.

The recall is being conducted in cooperation with the U.S. Consumer Product Safety Commission (CPSC).

Missing Safety Pegs Create Risk of Entrapment and Suffocation

By Truman Lewis of ConsumerAffairs

The U.S. Consumer Product Safety Commission (CPSC) is repeating the 2008 recall of more than 985,000 drop-side cribs with "Crib Trigger Lock and Safety Peg" hardware.

In January 2011, CPSC and Delta Enterprise Corp., the crib's manufacturer, learned of a 2009 death in which a 7-month-old girl from Colorado Springs, Colo., became entrapped and suffocated between the detached drop-side and mattress of her recalled crib. The crib was purchased secondhand and re-assembled without safety pegs in the bottom tracks.

Missing safety pegs can create a situation where the crib's drop-side rail disengages from the track. This can create a hazardous space in which an infant can become entrapped and suffocate.

At the time of the October 2008 recall, CPSC notified consumers about the death of an 8-month-old girl who became entrapped and suffocated when the drop side of the crib detached. The crib involved in this incident also was re-assembled without safety pegs. At the time of the October 2008 recall announcement, there were reports of two entrapments and nine detachments in cribs without safety pegs.

"Buying or accepting cribs second hand can be risky," said CPSC Chairman Inez Tenenbaum. "Second hand cribs may not come with all of the necessary parts that are needed to make sure your baby is safe. We urge parents and caregivers to use caution and to be aware that new rules established by CPSC will bring safer cribs to the market this summer."

The repeated recall involves cribs that were made in Taiwan and Indonesia. The cribs were sold at major retail stores including Kmart, Target and Walmart between January 1995 and December 2005 (through September 2007 for model 4624) for about $100.

Delta's name and address is printed on the mattress support boards and the Delta logo is on the crib's top teether rail. Model numbers are located on the top of the mattress support board. This announcement includes the following 49 crib models with "Crib Trigger Lock with Safety Peg" drop-side hardware:

• 4320, 4340;
• 4500, 4520, 4530, 4532, 4540, 4542, 4550, 4551, 4580;
• 4600, 4620, 4624 - production dates 01/06 thru 11/07, 4640, 4660, 4720, 4735, 4742, 4750 - production dates 01/95 thru 12/00;
• 4760, 4770, 4780, 4790;
• 4820, 4840, 4850, 4860, 4880, 4890, 4892; and
• 4900, 4910, 4920, 4925-2, 4925-6, 4930, 4940, 4943, 4944, 4947, 4948, 4949, 4950, 4958, 4963, 4968, 4969, 4980.

CPSC urges parents and caregivers to immediately stop using cribs that are missing a safety peg on either leg of the drop side and contact Delta to receive a free, easy-to-install repair kit. Call Delta toll-free at (800) 816-5304 anytime or visit the firm's website at www.cribrecallcenter.com to order the free repair kit.

Parents and caregivers are encouraged to find a safe, alternative sleep environment for their child until the repair kit, with new safety pegs, is safely installed on the recalled cribs.

CPSC reminds parents not to use any crib with missing, broken or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop-side crib, parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for parts separating that can create a gap and entrap a child.

In addition, do not try to repair any side of the crib. Babies have died in cribs where repairs were attempted by caregivers. Crib age is a factor in safety. At a minimum, CPSC staff recommends that you do not use a crib that is older than 10 years old. New, mandatory federal crib rules take effect on June 28, 2011. All cribs manufactured and sold after that date must meet new and improved safety requirements. Older cribs do not meet the new standard and can have a variety of safety problems.

U.S. hadn't updated crib safety standards for 30 years

By James R. Hood of ConsumerAffairs

Setting aside objections from retailers and manufacturers, the U.S. Consumer Product Safety Commission is implementing new safety standards for baby cribs later this month.

Effective June 28, anyone who manufactures or sells cribs will be required to meet the new standards, although day care centers, crib rental companies and hotels will have until December 28, 2012 to update their cribs.

“I am very pleased that the new mandatory crib standards will stop the manufacture and sale of dangerous traditional drop-side cribs and will vastly improve the structural integrity of cribs,” said CPSC chair Inez M. Tenenbaum, noting that crib safety standards have not been updated in nearly 30 years.

Detaching drop-side rails were associated with at least 32 infant suffocation and strangulation deaths since 2000, according to the CPSC. Additional deaths have occurred due to faulty or defective hardware.

Manufacturers and retailers had objected that the new rules would cause an economic hardship, particularly on smaller stores but the commission voted 3-2 to impose the new standards on schedule.

The new standards will:

1. stop the manufacture and sale of dangerous, traditional drop-side cribs;

2. make mattress supports stronger;

3. improve slat strength,

4. make crib hardware more durable; and

5. make safety testing more rigorous.

The standards aim to keep children safer in their cribs and prevent deaths resulting from detaching crib drop-sides and faulty or defective hardware. The tougher standards were mandated by the Consumer Product Safety Improvement Act of 2008.

Tenenbaum said the commission granted the delays to child care centers, crib rental stores and hotels and motels were necessary not only to minimize the economic impact but also to prevent shortages of new cribs. She estimated that replacing all of the cribs already in use at such locations would create a demand of approximately 935,000 cribs, which would amount to nearly $467 million in replacement costs.

“In order to ensure sufficient availability of compliant cribs and ensure an orderly and successful transition to the use of complaint cribs by child care providers and places of public accommodation, the Commission adopted a two-step phase in of the rule,” Tenenbaum said.

Retailers unhappy

Any cribs not meeting the current standard must be destroyed if they’re not sold by June 28. Industry estimates put the number of unsold cribs between 10,000 and 20,000. Some retailers, hoping to clear out their stock, have offered steep discounts to consumers.

“Overregulation is going to lead to the destroying of thousands of cribs that are perfectly good — many that are better than what will come out after the new regulations,” Gene Francis, a South Dakota-based retailer and member of the National Independent Nursery Furniture Retailers Association, told Kids Today.

But Commissioner Thomas Moore showed little sympathy for that argument.

"We expect companies to comply with the Commission’s rules," he said. "It appears that the vast majority of retailers did plan and are ready to comply by the June 28th date.  In a rule of this magnitude, it is expected that there will be 
some market disruption and that some companies will experience economic loss."

Moore said it was impractical to ask the CPSC to allow retailers to continue selling cribs that do not meet the new standard.

"There is little that we know about the noncomplying cribs these retailers want to sell or about the reasons the retailers find themselves with noncompliant inventory.  However, there is much that we don’t know.  When were these cribs made?  Who made them and where?  Who tested them and when?  What standard were they tested to?  When were they ordered?  Did the quantity ordered take into account the looming effective date of the new crib standards?"

"Were retailers buying imported noncomplying cribs at fire sale prices to try to make a profit before they had to start buying more expensive cribs that met the new standards?" Moore asked.  "Will retrofit kits be available to bring the cribs into compliance?  We simply do not know."

The crib's tubular metal mattress-support frame can bend or detach and cause part of the mattress to collapse, creating a space into which an infant or toddler can roll and become wedged, entrapped or fall out of the crib.

          









      

CPSC has received a report of a one-year-old child from North Attleboro, Mass. who suffocated when he became entrapped between the crib mattress and the crib frame in April 2008. CPSC is aware of 13 additional incidents involving the recalled cribs collapsing due to the metal mattress-support frame bending or detaching, including one child entrapment that did not result in injury, and one child who suffered minor cuts to his head when his mattress collapsed and he fell out of the crib.

CPSC staff urges parents and caregivers to stop using these cribs immediately and find an alternative, safe sleeping environment for their baby. Do not attempt to fix these cribs.

Due to the fact that Simplicity and its successor, SFCA Inc., are no longer in business, CPSC has limited information about the number of cribs sold.

All Simplicity drop-side cribs have previously been recalled for a hazard involving the drop side. Simplicity drop-side cribs could still be in use by parents or caregivers who are unaware of the recalls or by those who received a repair kit to immobilize the drop side from Simplicity when the firm was still in business. This recall involves all Simplicity cribs with tubular metal mattress-support frames, which include but are not limited to the following models:

Some model numbers are followed by letters, indicating the color or finish of the crib. The name "Simplicity Inc." or "Simplicity for Children" appears on a label on the crib's mattress-support frame and/or the crib's end panels. The cribs were manufactured in China.

The recalled cribs were sold at Walmart, Target, Babies R Us and other stores nationwide for between $150 and $300. Consumers should contact the store where the crib was purchased to receive a refund, replacement crib or store credit.

Warning

CPSC would like to remind parents not to use any crib with missing, broken or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop-side crib, parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for disengagement. Any disengagement can create a gap, which could fatally entrap a child. In addition, do not try to repair any side of the crib with tape, wire, rope or by other means. Infants and toddlers have died in cribs with makeshift repairs.

For more information on Crib Safety, visit CPSC's Crib Information Center.

The recall is being conducted in cooperation with the U.S. Consumer Product Safety Commission (CPSC).

More than 9 million dangerous cribs recalled since 2005

By Mark Huffman of ConsumerAffairs

After high-profile recalls of drop-side cribs that can suffocate infants, the Consumer Product Safety Commission has expanded its recall to include two million cribs made by seven companies.

The beds included in the recall were made by Child Craft, Delta Enterprises Corp., Evenflo, Jardine Enterprises, LaJobi, More on this recall and Simmons Juvenile Products Inc.

Some, but not all, are the drop-side cribs, which pose a danger to infants who become trapped in the gap between the mattress and the side of the crib. Included in this latest recall is the Child Craft brand "Crib 'N' Double Bed" full size stationary-side crib with dowel.

The crib's stationary side can be assembled upside-down but still appears to be assembled correctly. If assembled upside-down, the crib side contains a hazardous five-inch gap at the top of the crib. Infants or toddlers can become entrapped in this gap, which can lead to entrapment, strangulation or other injuries.

CPSC has received four reports of children becoming entrapped between the dowel and the crib's stationary front side. In two of those reports, the child was trapped by his/her head and was in danger of being strangled. In the other two reports, the child was trapped by his/her arm. This hazard can occur on both the front and back sides of the crib, the agency said.

Listed below are cribs included in the latest recall.

747,000 Delta drop-side cribs

Improper installation can cause the mattress platform to collapse.

This recall involves Delta drop-side cribs with three different types of drop-side hardware and Delta cribs with wooden stabilizer bars that support the mattress platform.

• Delta Enterprises Corp.

750,000 Jenny Lind drop-side cribs distributed by Evenflo

CPSC and Evenflo have received 31 reports of drop sides that malfunctioned or detached. One involved the entrapment of a seven-month-old boy between the drop side and the crib mattress. He sustained bumps and bruises to his head. Nine children fell out of the crib when the drop side detached, unlocked or fell off. Seven of those children sustained minor injuries, including bumps, bruises and cuts. Fourteen other incidents involved no injuries. In addition, CPSC has received two reports of children who became entrapped when the mattress support detached in one corner of cribs manufactured between 2000 and 2004.

• More on this recall

306,000 Bonavita, Babi Italia and ISSI drop-side cribs manufactured by LaJobi

This recall involves all models of Bonavita, Babi Italia and ISSI drop-side cribs manufactured by LaJobi. The cribs have drop-side hardware that contains metal or plastic pegs that are recessed into either the drop side or the headboard and footboard of the crib. A label on the headboard of the crib identifies the manufacturer as LaJobi.

• LaJobi

130,000 Jardine drop-side cribs imported by Toys R Us

The cribs' drop sides can malfunction, detach or otherwise fail, causing part of the drop side to fall out of position, creating a space into which an infant or toddler can roll and become wedged or entrapped, which can lead to strangulation or suffocation.

• Jardine Enterprises

156,000 Million Dollar Baby drop-side cribs

CPSC and Million Dollar Baby have received 43 reports of drop side failures. There were eight reports of children being entrapped between the mattress and drop side resulting in three reports of bruises to the head or upper body. Additionally, three children fell out of the crib when the drop side failed but they were not injured.

• More on this recall

50,000 Simmons drop-side cribs

The cribs' drop sides can malfunction, detach or otherwise fail, causing part of the drop side to fall out of position, creating a space into which an infant or toddler can roll and become wedged or entrapped, which can lead to strangulation or suffocation. A child can also fall out of the crib. Drop-side incidents can also occur due to incorrect assembly and with age-related wear and tear. Style numbers are printed on a permanent label on the headboard.

• Simmons Juvenile Products Inc.

In the last five years more than nine million cribs have been recalled because of a potential hazard to children. Drop-side cribs are blamed for the deaths of 32 children since 2000, CPSC said.

The cribs drop sides can malfunction, detach or otherwise fail, causing part of the drop side to fall out of position, creating a space into which an infant or toddler can roll and become wedged or entrapped, which can lead to strangulation or suffocation. A child can also fall out of the crib. Drop-side incidents can also occur due to incorrect assembly and with age-related wear and tear.

Incidents/Injuries: CPSC and Evenflo have received 31 reports of drop sides that malfunctioned or detached. One involved the entrapment of a seven month old boy between the drop side and the crib mattress. He sustained bumps and bruises to his head. Nine children fell out of the crib when the drop side detached, unlocked or fell off. Seven of those children sustained minor injuries, including bumps, bruises and cuts. Fourteen other incidents involved no injuries.

In addition, CPSC has received two reports of children who became entrapped when the mattress support detached in one corner of cribs manufactured between 2000 and 2004.

The following Evenflo crib models are included in this recall. The model number is located on a label on the bottom beam of the headboard.

The cribs, made in Mexico and China, were sold at childrens product stores and various other retailers nationwide from January 2000 through November 2007 for about $200.

Consumers should immediately stop using the recalled drop-side cribs and contact Evenflo to receive a free repair kit that will immobilize the drop side. A repair kit for the mattress support system is also available for cribs with model numbers starting with 012 and 014 that were manufactured between 2000 and 2004. In the meantime, find an alternate, safe sleep environment for the child, such as a bassinet, play yard or toddler bed depending on the childs age. The repair kits will be provided to consumers within the next several weeks.

For additional information, contact Evenflo at (800) 356-2229 between 8 a.m. and 5 p.m. ET Monday through Friday or visit the firms web site at http://safety.evenflo.com

Cautionary note

Federal safety regulators remind parents not to use any crib with missing, broken, or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop-side crib, parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for disengagement. Disengagements can create a gap and entrap a child.

In addition, parents should not try to repair any side of the crib. Babies have died in cribs where repairs were attempted by caregivers. Age is a factor in the safety of any crib. At a minimum, CPSC staff recommends that you not use a crib that is older than 10 years. Many older cribs may not meet current voluntary standards and can have numerous safety problems.

The recall is being conducted in cooperation with the U.S. Consumer Product Safety Commission (CPSC).

Missing Safety Pegs Create Risk of Entrapment and Suffocation

By Truman Lewis of ConsumerAffairs

The U.S. Consumer Product Safety Commission (CPSC) is repeating the 2008 recall of more than 985,000 drop-side cribs with "Crib Trigger Lock and Safety Peg" hardware.

In January 2011, CPSC and Delta Enterprise Corp., the crib's manufacturer, learned of a 2009 death in which a 7-month-old girl from Colorado Springs, Colo., became entrapped and suffocated between the detached drop-side and mattress of her recalled crib. The crib was purchased secondhand and re-assembled without safety pegs in the bottom tracks.

Missing safety pegs can create a situation where the crib's drop-side rail disengages from the track. This can create a hazardous space in which an infant can become entrapped and suffocate.

At the time of the October 2008 recall, CPSC notified consumers about the death of an 8-month-old girl who became entrapped and suffocated when the drop side of the crib detached. The crib involved in this incident also was re-assembled without safety pegs. At the time of the October 2008 recall announcement, there were reports of two entrapments and nine detachments in cribs without safety pegs.

"Buying or accepting cribs second hand can be risky," said CPSC Chairman Inez Tenenbaum. "Second hand cribs may not come with all of the necessary parts that are needed to make sure your baby is safe. We urge parents and caregivers to use caution and to be aware that new rules established by CPSC will bring safer cribs to the market this summer."

The repeated recall involves cribs that were made in Taiwan and Indonesia. The cribs were sold at major retail stores including Kmart, Target and Walmart between January 1995 and December 2005 (through September 2007 for model 4624) for about $100.

Delta's name and address is printed on the mattress support boards and the Delta logo is on the crib's top teether rail. Model numbers are located on the top of the mattress support board. This announcement includes the following 49 crib models with "Crib Trigger Lock with Safety Peg" drop-side hardware:

• 4320, 4340;
• 4500, 4520, 4530, 4532, 4540, 4542, 4550, 4551, 4580;
• 4600, 4620, 4624 - production dates 01/06 thru 11/07, 4640, 4660, 4720, 4735, 4742, 4750 - production dates 01/95 thru 12/00;
• 4760, 4770, 4780, 4790;
• 4820, 4840, 4850, 4860, 4880, 4890, 4892; and
• 4900, 4910, 4920, 4925-2, 4925-6, 4930, 4940, 4943, 4944, 4947, 4948, 4949, 4950, 4958, 4963, 4968, 4969, 4980.

CPSC urges parents and caregivers to immediately stop using cribs that are missing a safety peg on either leg of the drop side and contact Delta to receive a free, easy-to-install repair kit. Call Delta toll-free at (800) 816-5304 anytime or visit the firm's website at www.cribrecallcenter.com to order the free repair kit.

Parents and caregivers are encouraged to find a safe, alternative sleep environment for their child until the repair kit, with new safety pegs, is safely installed on the recalled cribs.

CPSC reminds parents not to use any crib with missing, broken or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop-side crib, parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for parts separating that can create a gap and entrap a child.

In addition, do not try to repair any side of the crib. Babies have died in cribs where repairs were attempted by caregivers. Crib age is a factor in safety. At a minimum, CPSC staff recommends that you do not use a crib that is older than 10 years old. New, mandatory federal crib rules take effect on June 28, 2011. All cribs manufactured and sold after that date must meet new and improved safety requirements. Older cribs do not meet the new standard and can have a variety of safety problems.

U.S. hadn't updated crib safety standards for 30 years

By James R. Hood of ConsumerAffairs

Setting aside objections from retailers and manufacturers, the U.S. Consumer Product Safety Commission is implementing new safety standards for baby cribs later this month.

Effective June 28, anyone who manufactures or sells cribs will be required to meet the new standards, although day care centers, crib rental companies and hotels will have until December 28, 2012 to update their cribs.

“I am very pleased that the new mandatory crib standards will stop the manufacture and sale of dangerous traditional drop-side cribs and will vastly improve the structural integrity of cribs,” said CPSC chair Inez M. Tenenbaum, noting that crib safety standards have not been updated in nearly 30 years.

Detaching drop-side rails were associated with at least 32 infant suffocation and strangulation deaths since 2000, according to the CPSC. Additional deaths have occurred due to faulty or defective hardware.

Manufacturers and retailers had objected that the new rules would cause an economic hardship, particularly on smaller stores but the commission voted 3-2 to impose the new standards on schedule.

The new standards will:

1. stop the manufacture and sale of dangerous, traditional drop-side cribs;

2. make mattress supports stronger;

3. improve slat strength,

4. make crib hardware more durable; and

5. make safety testing more rigorous.

The standards aim to keep children safer in their cribs and prevent deaths resulting from detaching crib drop-sides and faulty or defective hardware. The tougher standards were mandated by the Consumer Product Safety Improvement Act of 2008.

Tenenbaum said the commission granted the delays to child care centers, crib rental stores and hotels and motels were necessary not only to minimize the economic impact but also to prevent shortages of new cribs. She estimated that replacing all of the cribs already in use at such locations would create a demand of approximately 935,000 cribs, which would amount to nearly $467 million in replacement costs.

“In order to ensure sufficient availability of compliant cribs and ensure an orderly and successful transition to the use of complaint cribs by child care providers and places of public accommodation, the Commission adopted a two-step phase in of the rule,” Tenenbaum said.

Retailers unhappy

Any cribs not meeting the current standard must be destroyed if they’re not sold by June 28. Industry estimates put the number of unsold cribs between 10,000 and 20,000. Some retailers, hoping to clear out their stock, have offered steep discounts to consumers.

“Overregulation is going to lead to the destroying of thousands of cribs that are perfectly good — many that are better than what will come out after the new regulations,” Gene Francis, a South Dakota-based retailer and member of the National Independent Nursery Furniture Retailers Association, told Kids Today.

But Commissioner Thomas Moore showed little sympathy for that argument.

"We expect companies to comply with the Commission’s rules," he said. "It appears that the vast majority of retailers did plan and are ready to comply by the June 28th date.  In a rule of this magnitude, it is expected that there will be 
some market disruption and that some companies will experience economic loss."

Moore said it was impractical to ask the CPSC to allow retailers to continue selling cribs that do not meet the new standard.

"There is little that we know about the noncomplying cribs these retailers want to sell or about the reasons the retailers find themselves with noncompliant inventory.  However, there is much that we don’t know.  When were these cribs made?  Who made them and where?  Who tested them and when?  What standard were they tested to?  When were they ordered?  Did the quantity ordered take into account the looming effective date of the new crib standards?"

"Were retailers buying imported noncomplying cribs at fire sale prices to try to make a profit before they had to start buying more expensive cribs that met the new standards?" Moore asked.  "Will retrofit kits be available to bring the cribs into compliance?  We simply do not know."